Bitzer compressor
-
30hp Bitzer 6G-30.2-40P Compressor Commercial Refrigerator Compressor R134a in stock
Bitzer 6G-30.2-40P specification
Power: 22KW
Power: 380V/440V-50HZ/60HZ
Cylinder diameter (mm): 75
Stroke (mm): 55
Number of cylinders: 6
Exhaust volume: 126.8m3/h
Foot mounting size: 305mmx381mm
Dimensions (mm): length 790 width 503 height 443
Suction pipe inner diameter (mm): 54
Exhaust pipe inner diameter (mm): 35
Oil charge (liter): 4.75
Suitable for refrigerant: R134a R404A R507A R407CWe can also provide the following models
（一）4PCS-102(Y） 4PES-12(Y)，4TES-12(Y) 4PES-12(Y) 4PES-15(Y)
4NES-14(Y) 4NES-20(Y) 4JE-15(Y) 4JE-22(Y) 4HE-18(Y)
4HE-25(Y) 4GE-23(Y) 4GE-30(Y) 6JE-25(Y) 6JE-33(Y)
6HE-25(Y) 6HE-35(Y) 6GE-30(Y) 6GE-40(Y) 6FE-40(Y)
6FE-50(Y) 8GE-50(Y) 8GE-60(Y) 8FE-60(Y) 4TCS-12.2(Y ）
4PCS-10.2(Y） 4PCS-15.2(Y） NCS-12.2(Y） NCS-20.2(Y）4J-13.2(Y)
4J-22.2(Y) 4H-15.2(Y) 4H-25.2(Y) 4G-20.2(Y) 4G-30.2(Y)
6J-22.2(Y) 6J-33.2(Y) 6H-25.2(Y) 6H-35.2(Y) 6 G-30.2(Y)
6G-40.2(Y) 6F-40.2(Y) 6F-50.2(Y) 8GC-50.2(Y) 8GC-60.2(Y) 8FC-60.2(Y)
（二）two stage bitzer reciprocating compressors
S4G-12.2Y，S6J-16.2Y S4N-8.2Y
S6H-20.2(Y) S6G-25.2(Y) S6F-30.2(Y)
Bizer two-stage compressor rated power 4KW-44KW
This series of compressors is the result of extensive research and development based on years of experience in producing efficient and reliable piston compressors.
These compressors have been further developed and optimized for alternative refrigerants, especially HCFC R22, HFC R404A, and R507A, in some important details.
Using proven parts over the years, it is a product with a reliable structure that is widely used in a wide range of fields.
The matching of the airflow path and valve plate structure to cryogenic applications, coupled with the specially designed second generation motors and drive components for the highest efficiency, results in higher performance than previous cryogenic systems.
Universal compressor series for chlorine free HFC and HCFC’s refrigerants
Conversion to use HFC refrigerant:
● Use polyester oil approved by Bizer (compressor model suffix with “Y”) ● Match intermediate cooling expansion valve suitable for HFC refrigerant
Most important design features: □ Short gas path
● Large suction nozzle ● Minimum heat exchange □ Reliable valve plate design
● Impact resistant spring steel valve plate
Minimum space requirements
Extremely compact size design □ Low vibration and low noise
● 4-cylinder and 6-cylinder structures with optimized mass balance design, particularly quiet operation □ High cooling capacity and minimum energy consumption
● High efficiency working valve plate ● Minimum dead center clearance ● High efficiency large volume motor □ Durable drive components
● Eccentric shafts and crankshafts with hardened surfaces ● Sealed main bearing shells and large capacity oil pumps ● Patent oil return system ensures extremely low oil carryover rate ● Low friction bearing shells and aluminum pistons ● Piston rings with hard chrome plated surfaces ● Special crank pin bearing shells □ Pressure oil supply lubrication system
● Adopt gear oil pump that can work in both directions □ Large capacity built-in motor
● Gas cooling
Optimized rotor and stator sections with the highest efficiency and power factor □ IP54 protection grade junction box
Optional IP66 □ Electronic motor protection device
● Use PTC sensors to monitor motor temperature ● Exhaust temperature protection (optional) □ Built-in differential pressure safety valve □ Intermediate cooling liquid injection system
Optional mechanical TX valve
● Select an electronically controlled CIC system for R22
Options:
● Installed liquid subcooler ● Exhaust temperature protection sensor
● Motor protection device with additional functions (INT389) ● Crankcase heater ● Oil pressure protection switch ● Oil maintenance valve -
140HP bitzer screw refrigratiom compressor CSH8693-140Y for Industrial Refrigeration
Compressor Model: CSH8693-140Y
Refrigrant: R134A
Displacement (m3/h): 535m3/h
Max power input: 148kw
Horse power (hp): 140 HP
Winding ratio: 50/50 -
40HP bitzer Reciprocating Commercial Refrigeration Compressor 6GE-40Y for Condensing Unit
Compressor Model: 6GE-40Y
Refrigrant: R404A/R22
Displacement (m3/h): 126.8 m3/h
Max power consumption: 45.1kw
Horse power (hp): 40 HP
Oil charge: 4.75L
-
CSH6563-60Y-40P CSH7563-80-40P CSH8571 50-240hp screw refrigeration bitzer
Model: CSH7563-80-40P
Oil Charge:15L
Weight:520KGS
Horse Power:80HP
Type:Screw
-
50HP Bitzer Semi-hermetic Reciprocating Compressors 6FE-50Y-40P
Electrical: Part Winding
Voltage: 380v-420v/3ph/50hz – 440v-480v/3ph/60hz
Net Weight: 241kg
Dimensions:
790 (L) x 503 (W) x 443 (H) -
140HP Bitzer Refrigeration Screw Compressor CSH – CSH8573-140(Y)
Technical Data
Displacement (2900 RPM 50 Hz) 410 m³/h
Displacement (3500 RPM 60 Hz) 495 m³/h
Weight 870 kg
Max. pressure (LP/HP) 19 / 28 bar
Connection suction line DN 100
Connection discharge line 76 mm – 3 1/8”
Oil type R1234yf/R1234ze(E)/R450A/R513A BSE170 (Option)
Oil type R134a/R407C/R404A/R507A/R407A/R407F BSE170 (Option)
Oil type R22 B320SH (Standard) -
Bitzer 6FE-50Y-40P compressor
SPECIFICATION
Electrical: Part Winding
Voltage: 380v-420v/3ph/50hz – 440v-480v/3ph/60hz
Net Weight: 241kg
Dimensions:
790 (L) x 503 (W) x 443 (H) -
40HP Biter refrigeration compressor 6GE-40Y-40P for chiller
Technical Data
Displacement (1450 RPM 50Hz) 126,8 m³/h
Displacement (1750 RPM 60Hz) 153,0 m³/h
No. of cylinder x bore x stroke 6 x 75 mm x 55 mm
Weight 238 kg
Max. pressure (LP/HP) 19 / 32 bar
Connection suction line 54 mm – 2 1/8”
Connection discharge line 35 mm – 1 3/8”
-
Refrigeration Semi hermetic compressor 2-stage S6F-30.2Y
- Model:S6F-30.2Y
- Displacement at 1450 min-1 : 101,1 (LP) 50,5 (HP)
- Number of cylinders : 6
- Oilcharge : 4,75 dm3
-
Bitzer 4GE-30Y-40P semi-hermetic reciprocating compressor
The ECOLINE range is the creative advancement of the proven, robust and powerful semi-hermetic reciprocating compressors from BITZER. It combines high efficiency, smooth running, a wide range of applications, flexibility in refrigerant selection, solid design and high reliability.
- Motor version : 1
- Displacement at 1450 min-1 : 84,6
- Number of cylinders : 4
